Several times in recent posts, I've mentioned that after nearly a year, I am finally using my longarm again. I had been able to fix previous little issues that I'd encounter, but this time, I was totally flummoxed.
So here is the saga of my longarm woes, and if you want the short version - it was the thread, not the machine. Read on for the details.
Last fall - say from the end of August through October, I was hitting on all cylinders with using the longarm. I'd had massive success by quilting several quilts, feeling ever more confident with each finish. Because of that confidence, I ordered a good supply of backing fabrics, thread cones, and pre-wound bobbins. I wanted these necessary supplies on hand so nothing could break my stride.
I was setting myself up for a few more quilting finishes before the holidays.
I couldn't have been more wrong. A big fat wrong like one I could never have imagined. I put one of those new spools of thread on the machine - a white background required a white thread. But this thread broke after just a few stitches. Over and over, I rethreaded the machine only to have break after break. The upper thread was breaking, time after time. I'd rethread, adjust the tension, all the usual things to no avail. Thread kept breaking.
I couldn't figure it out. My earlier successes with repair and maintenance were not helping me a bit. I knew it had to be the thread, but perhaps the new thread required an adjustment of the tension? So I focused on those two areas - thread and tension. A slight turn, then test; another turn, then test; over and over; again and again. I was getting nowhere.
I went back to the previous spool of thread to see what I could figure out. I had been sewing really well with it, but by then I'd done too much tension-adjusting, and now everything was out of whack. I had created a giant mess.
The holidays came, and I had to leave the longarm in favor of other tasks needing my attention. Then we left for our 3-month winter in Florida. Once back, I had a retreat to prepare for, and then my second knee replacement. I couldn't even think about standing at the longarm until after recovery.
But it was always niggling in the back of my mind - something had to be done, or else I needed to get rid of the longarm. It made no sense to have it taking up valuable sewing room space for it not to be used.
Finally, as summer rolled in and my knee was healing nicely, I had made the decision that my longarm needed a professional. DH and I lugged that heavy machine down the steps and out to the car for a day trip to Amish Country, as Ohioans call it - Holmes County, OH, to out-of-state folks. I'd been told of a wonderful shop that specializes in repairing longarm machines - Chestnut Ridge.
I went back about two weeks later to pick it up and Jacob, the repairman, asked me how the tension had gotten so far out of sync. I confessed that in my frustration, I'd really turned that knob - I had no idea how much off kilter I'd gotten. (He was gracious in not condemning me for that.)
Back home, set up and ready to go, I loaded on the quilt that was on when it stopped working. A sweet little pink and white pinwheel quilt for our new granddaughter. I put that new spool on because it was the only white I had for this pink and white quilt.
MORE THREAD BREAKAGE!!! Just like before, after only a very few stitches, the upper thread broke. I was beside myself.
I couldn't believe I was still having that same trouble. I limped my way through finishing that baby quilt with many stops and starts. I called back up to Chestnut Ridge and talked to Jacob. He had me send him some pictures of how I'd threaded, thinking that was the problem. I was very nearly ready to take it back up there and have him sit with me to show me what I was doing wrong.
One morning in late October, just before leaving for a Frankfort Girls gathering, I yanked that spool off the machine to take with me. The longarmers in our group might be able to tell me why my thread was doing this.
Their diagnosis was instant. I was using polyester thread instead of cotton thread. The entire problem solved with just a glance at the spool.
Oh, those girls! I have learned so much from my long association with them, but this just might be the single-most valuable lesson I would ever have. Ever since that day, I have quilted with great success. It's nothing short of miraculous to me.
I can only use 100% cotton thread. How simple is that!? Since learning this valuable tidbit, I have been totally successful with how my machine is working. I have a lot of catching up to do, so look out!! Below, see the latest to come off the machine.
Happy Quilting, Friends!
Jayne
.jpeg)

.jpeg)

.jpeg)


























